Display Modules
melabs Serial LCD Module 20 character x 4 line - $49.95
|
 |
| Volume
Pricing |
| Quantity |
Price
Each |
| 1-9 |
$49.95 |
| 10-24 |
$45.00 |
| 25-99 |
$40.00 |
| 100+ |
$35.00 |
|
The melabs Serial LCD (SLCD) can display serial data from either asynchronous
RS232-style or synchronous I2C input. A range of baud rates from 2400
to 57,600 are available and the serial data is buffered so that no delay is
necessary when transmitting data to the SLCD.
The display includes an LED backlight with variable brightness. The
serial LCD board is also available separately for use with other displays that
utilize a Hitachi HD44780 or equivalent controller IC.
-
Software-controlled, variable backlight (Off to Full
Brightness in 256 steps).
-
Asynchronous serial supported at baud rates of 2400,
9600, 19200, and a blistering 57600. (jumper selectable)
-
Jumper-selectable input inversion for use with either True
Mode or Inverted Mode Serial. Connect directly to a PC serial port or
to an output pin on a microcontroller.
-
Compatible with both RS-232 (+/- 12V) and TTL (0-5V) levels.
-
Synchronous serial I2C input up to 400K bps.
-
Change I2C slave address via jumpers or with a software
command.
-
80-character buffered communication.
-
User-programmable boot screen memory allows a custom message
to be displayed on power up.
-
Use standard commands compatible with Hitachi HD44780 or our
easy-to-understand special protocol to control the display
-
Built-in special functions include scroll up, scroll down,
set backlight, select line, display bargraph, cursor appearance, change I2C
address, save/recall strings.
-
Onboard non-volatile memory allows you to save custom
messages and then recall/display them with a short command.
-
Fast bargraph displays (up to the full width of the display)
can be anchored on the left side or right side. Fast enough to display
stereo audio levels!
-
5-volt operation with less than 5mA current consumption
(backlight off)
-
4-line display PCB (outside edge) measures 98mm wide and
60mm high
Download Documentation
|
|
melabs Serial LCD Module 16 character x 2 line - $39.95
|
|
| Volume
Pricing |
| Quantity |
Price
Each |
| 1-9 |
$39.95 |
| 10-24 |
$36.00 |
| 25-99 |
$32.00 |
| 100+ |
$28.00 |
|
|
|
Same set of
features as our 20 x 4 model above, but in a smaller display with 2 lines
of 16 characters each.
2-line display PCB (outside edge) measures 80mm wide and 36mm high.
Download Documentation
|
|
 |
| Volume
Pricing |
| Quantity |
Price
Each |
| 1-9 |
$24.95 |
| 10-24 |
$20.00 |
| 25-99 |
$17.50 |
| 100+ |
$12.50 |
|
The melabs Serial LCD Controller (SLCDC) can drive displays that use the
Hitachi HD44780 or equivalent chipset. It accepts serial data from either asynchronous
RS232-style or synchronous I2C input. A range of baud rates from 2400
to 57,600 are available and the serial data is buffered so that no delay is
necessary when transmitting data to the SLCDC.
The Controller offers both dual-row and single-row header patterns for
connecting LCDs of various configurations. Header pins and double sided
tape are included to facilitate mounting. LCD is not included.
-
Software-controlled, variable backlight (Off to Full
Brightness in 256 steps).*
-
Asynchronous serial supported at baud rates of 2400,
9600, 19200, and a blistering 57600. (jumper selectable)
-
Jumper-selectable input inversion for use with either True
Mode or Inverted Mode Serial. Connect directly to a PC serial port or
to an output pin on a microcontroller.
-
Compatible with both RS-232 (+/- 12V) and TTL (0-5V) levels.
-
Synchronous serial I2C input up to 400K bps.
-
Change I2C slave address via jumpers or with a software
command.
-
80-character buffered communication.
-
User-programmable boot screen memory allows a custom message
to be displayed on power up.
-
Use standard commands compatible with Hitachi HD44780 or our
easy-to-understand special protocol to control the display
-
Built-in special functions include scroll up, scroll down,
set backlight, select line, display bargraph, cursor appearance, change I2C
address, save/recall strings.
-
Onboard non-volatile memory allows you to save custom
messages and then recall/display them with a short command.
-
Fast bargraph displays (up to the full width of the display)
can be anchored on the left side or right side. Fast enough to display
stereo audio levels!
-
5-volt operation with less than 5mA current consumption
(backlight off)
* Backlight operation is dependent on capabilities and
current requirements of the driven LCD module.
Download Documentation
|
|
SLED-C4 Serial 4-Digit LED Display Module (Standard Model)
$34.95
Standard Model: 4 individually-controllable, right-hand
decimal points (no clock colon)
 |
The SLED-C4 from Reynolds Electronics provides a
simple asynchronous serial interface to a high contrast, four-digit,
seven-segment, super red LED display module - with 6 unique built-in
animations. The display can be driven with a single pin from
your microcontroller.
Download: SLED-C4 Display
Datasheet |
- 6 unique, built-in display animations for printing, scrolling,
clearing digits, and other special effects
- Flicker-free multiplexed LED display with fast response times
- Available with 4 right-hand decimal points, or clock type
display with 2 colon LEDs
- Two command modes for total control of individual LED segments
- Animation speed control for enhanced creative freedom and
custom effects
- Stores display brightness setting in onboard non-volatile
memory for automatic power-up brightness setting
- Stores a four-digit splash screen in onboard non-volatile
memory for automatic display at power-up
- Eliminates the need for continuous display updates and refresh
loop in the host controller's firmware
- Simple, single-wire asynchronous serial control with
pin-selectable data rates of 9600 or 19200 bps
- Automatically refreshes and updates each display digit at
~1.2KHz
- Low-power sleep mode current draw <100uA typical, with
automatic display restore on wake-up
- Flexible operating voltage range from 4.5 to 5.5 VDC
- Small footprint PCB measuring only 2.4" x 1.2"
- 2KHz PWM brightness control with 126 levels: 0 = off, 125 =
max brightness
- Multiplexed display digits for reduced power consumption
- Auxiliary digital output pin signal end of onboard animation
sequence, or may be used as digital output when built-animations
are not used
|
|
SLED-C4C Serial 4-Digit LED Display Module (Clock Model) - $34.95
 |
Clock Model: Same as Standard Model SLED-C4 above, but with
2 LEDs positioned in the center of the display that serve as a colon
for time display. The right-hand decimal points are disabled
on this model. |
|
|
|
|
